Supermicro 6026TT-HIBXRF Intel-« 5520 Socket B (LGA 1366) Rack (2U) Black
Introduction
SuperServer 6026TT-HIBXRF (Black). Designed for optimal performance, the dual-processor SuperServer 6026 series support the QPI format quad-core/dual-core Xeon® 5600/5500 Series processors in a high-density 2U form-factor. The 6026 SuperServers are ideal for network infrastructure, front-end enterprise, and minimal-downtime cluster server systems.
Specifications
Product SKUs
- SYS-6026TT-HIBXRF
- SuperServer 6026TT-HIBXRF (Black)
Motherboard
- 4x Super X8DTT-HIBXF+
Processor/Cache CPU
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon®processor(s) of the same type below:
- Intel® Xeon® Processor X5600/E5600/L5600 Series
(Westmere) 40W - 95W
- Intel® Xeon® Processor X5500/E5500/L5500 Series
(Nehalem-EP) 38W - 95W
QPI
- up to 6.4 GT/s
System Memory Memory Capacity
- 12x 240-pin DIMM slots
- Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
Memory Type
- 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
- 1GB, 2GB, 4GB , 8GB** , 16GB**
Memory Voltage
- 1.5 V / 1.35 V
Error Detection
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices (per Node) Infiniband
- Mellanox ConnectX DDR Infiniband 20Gbps Controller
Chipset
- Intel® 5520 (Tylersburg) chipset
- ICH10R + IOH-36D
SATA
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
IPMI
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
Network Controllers
- Dual Intel® 82574L Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
- Matrox G200eW
Super I/O
- Winbond W83527HG chip
Clock Generator
- 932S421 chip
Input / Output (per Node) Serial ATA
- Six Serial ATA ports
- 3 SATA hard drives supported
LAN
- 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
USB
- 2 rear + 1 header (2 Ports)
- 4 total USB ports, 2.0 Compliant / 1.1 Compliant
VGA
- 1x VGA Port
Serial Port
- 1 Fast UART 16550 serial port
Infiniband
- 1 External QSFP Infiniband Connector
System BIOS (per Node) BIOS Type
- 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
Chassis Form Factor
- 2U Rackmount
Model
- CSE-827H-R1400B
Dimensions
- Height 3.5" (89mm) Width 17.2" (437mm) Depth 28.5" (724mm)
Gross Weight
85 lbs (38.6kg)
Buttons
- Power On/Off button
- UID button
LEDs
- Power LED (on power button)
- Network activity LED
- System Overheat/fan fail/power fail/ LED
- UID LED (on UID button)
Expansion Slots (per Node) PCI-Express
- 1 (x16) PCI-E ( Low Profile)
Drive Bays (per Node) Hot-swap
- 3x 3.5" SATA Hot-swap drive bays
Hard drive Backplane 2U Hard drive Backplane System Cooling Fans
- 4x Cooling Fans
Power Supply 1400W high-efficiency (1+1) redundant power supply with PMBus AC Input
- 1100W Output @ 100-140V, 13.5-9.5A, 50-60Hz
- 1400W Output @ 180-240V, 9.5-7.0A, 50-60Hz
DC Output
- 1100W: +12V/92A; +5Vsb/4A
- 1400W: +12V/116A; +5Vsb/4A
With Distributor
- +5V: 30 Amp
- +3.3V: 24 Amp
- -12V: 0.6 Amp
Certification
- Gold Certified
PC Health Monitoring CPU
- Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
- CPU Core 6-Phase-switching voltage regulator
FAN
- Total of four 4-pin PWM fans
- 4x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
Temperature
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 4x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
LED
- Power Fail / Overheat LED
- Suspend-state Indicator LED
- UID LED
Other Features
- SDDC Support
Operating Environment / Compliance RoHS
- RoHS Compliant
Environmental Spec.
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
