comnet Single Channel Ethernet over
Introduction
The ComNet CopperLine® Ethernet over copper line supports up to sixteen
channels of 10/100Mbps Ethernet with Pass-through PoE over twisted pair
cable (CAT-5, UTP), or over coaxial cable. The single channel units may be
powered by a PoE switch or the included power supply. Four, eight, and
sixteen channel units operate from local power. These units provide the
ultimate flexibility for extending a powered device (PD) over long distance
copper. DIP switches are provided for user-selection of local or remote, 10 or
100Mbps, and 1 pair or 4 pair (UTP) settings.
Application
- Retrofit existing analog
CCTV installations to Ethernetbased systems
- CCTV systems for casinos,
airports, school campuses
Features
- Transmits individual
Ethernet data channels with Passthrough PoE over standard UTP or
Coaxial cable
- Extends Ethernet up to 3,000
feet (914 m) at 10 Mbps or 2,000 feet (610 m) at 100 Mbps over UTP cable
- Extends Ethernet up to 5,000
feet (1,524 m) at 10 Mbps or 2,000 feet (610m) at 100 Mbps over Coaxial
cable
- Extended temperature
operation from -40°C to +75°C
- Extended Pass-through PoE
meets the IEEE 802.3af standard for Power over Ethernet
- Full 10/100 Mbps Bandwidth
- Supports Multicast, Unicast
and Jumbo Frame
- Symmetric Bandwidth provides
consistent upload and download with virtually zero packet loss over the
total usable distance
- Type tested to RFC-2544
TCP/IP network bandwidth packet transmission standards
- User-selectable data rate
for maximum bandwidth and transmission distance utilization
- Complies with all major IEEE
standards and RFC network protocols for UDP, TCP/IP, HTTP/HTTPs
- Designed to meet full
compliance with the environmental requirements (ambient operating
temperature, mechanical shock, vibration, humidity with condensation,
high-line/lowline voltage conditions and transient voltage protection)
of
- NEMA TS-1/TS-2 and the
Caltrans Specification for Traffic
- Signal Control Equipment.
- Designed and manufactured in
the USA
- LED status indicators
confirm operating status
- Available in small-size,
ComFit interchangeable stand
- alone or 1RU high rack
mounted models
Specifications
- Ethernet
- Data Interface
- Data Rate
- DIP-switch selectable
10/100Mbps
- Full data rate / full
duplex up to the maximum rated distance
- RFC
- 2544 TCP/IP Packet
Transmission
- Standards
- IEEE 802.3af PoE, RFC:
768 UDP, 2068 HTTP, 793 TCP, 791 IP, 1783 TFTP, 894 IP over Ethernet.
- Connectors
- Ethernet RJ-45
- Extended Distance
- Coaxial (C): female BNC
- Ethernet (U): RJ-45
- Operating Power Powered by
PoE or 2-pin screw terminal for local power
- Power
- Pass-Through Mode
- 1 CH: Operates on PoE
power or optional 9 to 36 VDC or 24 VAC, 1.5 W
- 4 CH: 9 to 15 VDC, 5W
- 8 CH: 9 to 15 VDC, 10W
- 16 CH: 9 to 15 VDC, 20W
- Current
Protection
- Automatic Resettable
Solid-State Current Limiters
- Mechanical
- LED Indicators
- Operating Power
- Ethernet Link/Activity
- Extended Link/Activity
- Circuit Board
- Size
(L×W×H)
- 1 CH: 3.3 ×
2.5 × 1.1 in (8.4 × 6.4 × 2.8 cm)
- 4 CH: 6.1 ×
5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
- 8+ CH: 6.1 ×
19 × 1.75 in (15.5 × 48.26 × 4.45 cm)
- Number of Rack
Slots
- Shipping Weight
- 1 CH: <1 lbs./0.5
kg
- 4 CH: <2 lbs./0.9
kg
- 8+ CH: <5
lbs./2.3 kg
- Environmental
- MTBF >100,000 hours
- Operating Temp
- –
40° C to +75° C
- UL Safety certifications
conducted at maximum ambient temperatures (Tma) of 65ºC.
- Storage Temp –
40° C to +80° C
- Relative Humidity 0% to
95% (non-condensing)²
Characteristics
- Part Number
CLFE1EOC
- Description
1 Port Ethernet-over-UTP Extender
- Position
Local/Remote Configurable
- Channels 1
- Form Factor Small
Size
- Cable Coax