Supermicro SuperServer 5018D-MTF Intel-« C224 LGA 1150 (Socket H3) Rack (1U) Silver
Introduction
SuperServer 5018D-MTF (Black). Designed to deliver solid performance and mission-critical reliability for customer applications, these Supermicro uni-processor 1U rack servers support the latest Xeon® processor E3-1200 v3 family and 4th gen. CoreT i3 series processors and deliver additional levels of performance, power-efficiency and reliability.
Specifications
Product SKUs SYS-5018D-MTF
- SuperServer 5018D-MTF (Black)
Motherboard
Processor/Cache CPU
- Intel® Xeon® processor E3-1200 v3/v4 family, 4th Gen Core i3, Pentium, Celeron processors
- Socket H3 (LGA 1150)
System Memory & Memory Capacity
- 4x 240-pin DDR3 DIMM slots
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type
- 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
Memory Voltage
Error Detection
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
On-Board Devices Chipset
SATA
- SATA3 (6Gbps) w/ RAID 0, 1, 10, 5
- SATA2 (3Gbps) w/ RAID 0, 1
IPMI
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC with 10/100/1000Mbps
Network Controllers
- Intel® i217LM + Intel® i210AT Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
VGA
Input / Output Serial ATA
- 4x SATA3 (6Gbps) ports
- 2x SATA2 (3Gbps) ports
- SATA DOM Power Connector
LAN
- 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
USB
- 4x USB 3.0 ports (1 Type-A, 2+1 via header)
- 6x USB 2.0 ports (4 rear, 2 via header)
VGA
Serial Port / Header
- 1x Fast UART 16550 serial port
- 1x internal header
PC Health Monitoring Voltage
- Monitors for CPU Cores, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
- Total of five 4-pin fan headers supporting up to 5 fans
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
Temperature
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
LED
- CPU / System Overheat LED
- +5V Standby alert LED
Other Features
- Chassis intrusion detection
- Chassis intrusion header
Chassis Form Factor
Model
Dimensions and Weight Height
Width
Depth
Weight
- Gross Weight: 30.4 lbs (13.8 kg)
- Net Weight: 17.6 lbs (8 kg)
Available Colors
Front Panel Buttons
- Power On/Off button
- System Reset button
LEDs
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
Ports
- 2x USB ports
- 1x Serial COM Port
Expansion Slots PCI-Express
- 1x PCI-E 3.0 x8 (in x16) Full-height slot*
Drive Bays Hot-swap
- 4x 3.5" Hot-swap SATA3 HDDs w/ RAID
Peripheral Bay
- Slim optical drive (optional)
Backplane SAS2/SATA3 HDD Backplane
(SAS support requires optional SAS controller) System Cooling Fans
- 4x 4cm 12,500 RPM PWM fans
- Optional fans to cool add-on cards
Power Supply 350W AC power supply w/ PFC AC Voltage
- 100-240 V, 50-60 Hz, 4.2-1.8 Amp
+5V
+5V standby
+12V
+3.3V
Certification
System BIOS
- 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
Management Software
- IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
Power Configurations
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
Operating Environment / Compliance RoHS
- RoHS2 (2011/65/EU) Compliant
Environmental Spec.
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)